RAM 6000 Technical Information PDF herunterladen (Seite 95)

Software Manual 95

Services Tab

eth0:

Enable DHCP: Specify whether you want to enable a DHCP Server for the interface. Note: If the interface is not

enabled, or has been set to obtain its addressing parameters via DHCP, this option will be forced to “No”, and disabled

until the interface is both enabled and set to use a static IP address.

Enable Default Gateway: Provide Default Gateway IP Address to DHCP Client. Select No if you wish to only gain access

to this device’s web interface and have another connection from your PC out to the internet. Select Yes if you wish to

gain access to the internet through this device.

Starting Address (Required): Enter the Starting IP Address of a range you want the DHCP Serer to provide for clients.

Recommended Setting: An address valid for the subnet for which the interface is configured. Care should be used to endure

that there is no conflict with any pre-existing devices on that subnet which may have been already configured to use statically

assigned IP addresses.

Ending Address (Required): Enter the Ending IP Address of a range you want the DHCP Server to provide for clients.

Recommended Setting: An address valid for the subnet for which the interface is configured, beyond that chosen for the

starting value of the range. Care should be used to ensure that there is no conflict with any pre-existing devices on that sub-

net which may have been already configured to use statically assigned IP addresses.

usb0:

Enable DHCP: Specify whether you want to enable a DHCP Server for the interface. Note: If the interface is not

enabled, or has been set to obtain its addressing parameters via DHCP, this option will be forced to “NO”, and disabled

until the interface is both enabled and set to use a static IP Address.

Enable Default Gateway: Provide Default Gateway IP Address to DHCP Client. Select NO if you wish to only gain access

to this device’s web interface and have another connection from your PC out to the internet. Select YES if you wish to

gain access to the internet through this device.

Starting Address (Required Field): Enter the Starting IP Address of a range you want the DHCP Server to provide for

clients.

Recommended Setting: An address valid for the subnet for which the interface is configured. Care should be used to ensure

that there is no conflict with any pre-existing devices on that subnet which may have been already configured to use statically

assigned IP addresses.

Ending Address (Required Field): Enter the Ending IP Address of a range you want the DHCP Server to provide for cli-

ents.

Recommended Setting: An address valid for the subnet for which the interface is configured, beyond that chosen for the

starting value of the range. Care should be used to ensure that there is no conflict with any pre-existing devices on that sub-

net which may have been already configured to use statically assigned IP addresses.

Show DHCP Leases: Click on the Show DHCP button to display the current DHCP leases logged on to the unit.

Distribute DHCP Leases Based on MAC Address:

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 210 211

RAM 6000 Technical Information Seite 95