
Software Manual 60
Network Tab
Encryption Mode: This option allows you to setup the wireless security. If security is disabled, any client can connect
to the Access Point. Turning on WPA requires clients to know an encryption key before connecting to the network.
WPA Pre-Shared Key (Required): This option is available when WEP or WPA is selected as an option for Encryption
and allow the user to specify the encryption key to be used. For WEP, this should be a 26 digit hexadecimal value. For
WPA, this should be a passphrase of 8-63 printable ASCII characters. WPA Pre-Shared Key: This option allows the
sender and recipient to share a secret key.
• Click on the “Save” button for changes to be saved without activating the interface, the “Apply” button will save
your settings and apply them immediately. To refresh the screen, click on the “Refresh” button.
3.4.2.3 USB
The USB interfaces menu item allows the administrator to configure the USB port of the Red Lion routers to meet their
needs. The default address is set for 192.168.111.1 with the subnet mask of 255.255.255.0
• Click on the USB menu item and the following dialog window will appear:
Enable USB Interface: Select YES to enable the USB interface. The recommended setting for this field if YES if using
this interface.
Enter IP Address: Enter the desired interface IP address in this field. The IP Address identifies a device on a TCP/IP net-
work. Every device on a network must have a unique address. The range of valid addresses for a given network is
determined by the value of the Netmask. Some addresses are reserved for special uses such as network and broad-
cast.
For example, if a netmask is 255.255.255.0 and the IP address assigned to the device is 192.168.1.3, then the range of
valid addresses is 192.168.1.1 through 192.168.1.254 as 192.168.1.0 is the value reserved for the network and
192.168.1.255 is the value reserved for the broadcast address.
Kommentare zu diesen Handbüchern