
Software Manual 201
hdrRoaming DISPLAYSTRING
None, Roaming - SIDS Guaranteed, Roaming - SIDS Not Guaranteed. EVDO
Roaming state.
Cellular Roaming indicator - EVDO.
roaming INTEGER32
0 or 1. 0 = currently not roaming, 1 = currently roaming.
Cellular current roaming status.
currentState INTEGER32
Connecting, Dormant, Connected, Disconnected, Error, CallIncoming. Current
Modem State.
Cellular state (e.g. connecting, dormant, connected, disconnected, error, call-
incoming).
speedPref DISPLAYSTRING
Automatic, CDMAonly, EVDOonly. What speed preference the modem is cur-
rently set to lock to.
Cellular Module speed pref.
roamPref DISPLAYSTRING
HomeOnly, HomePreferred - AUTO, RoamOnly, Aonly, Bonly, AutoA, AutoB,
unknown. The current setting for the modem's network roaming preference.
Cellular Module roaming pref.
devName DISPLAYSTRING The device name as presented by the operating system (e.g. /dev/ttyUSB0).
ifName DISPLAYSTRING
The cellular interface name, if known, as presented by the operating system
(e.g. ppp0).
txCount INTEGER32
Current Wireless PPP RX byte count since connection has been up, updated
every 30 minutes.
Cellular Module TX Byte Count, updated every 30 mins.
rxCount INTEGER32
Current Wireless PPP RX byte count since connection has been up, updated
every 30 minutes.
Cellular Module RX Byte Count, updated every 30 mins.
gprsState DISPLAYSTRING
The “state” of hte GSM connection: idle, ready, standby.
Cellular GPRS State.
rxLevel DISPLAYSTRING
The signal level seen at teh receiver measured in -dBm.
Cellular RX Level.
servingCell DISPLAYSTRING
The Current Cell on which the device is camped.
Cellular Serving Cell.
rrcState DISPLAYSTRING
Radio Resources Control State (also called Packet Data Transfer state): idle,
CELL_DCH, CELL_FACH, CELL_PCH, and URA_PCH
Cellular RCC State.
gsmChannel DISPLAYSTRING
Indicates which GSM channel or band of frequencies the device is currently
connected to.
Cellular GSM Channel.
psState DISPLAYSTRING
Pulls CELLMODEM_PS_STATE from /var/log/wireless.cardstats
Cellular PS State.
mode DISPLAYSTRING
Pulls CELLMODEM_MODE from /var/log/wireless.cardstats
Cellular Mode.
temperature DISPLAYSTRING
Pulls CELLMODEM_TEMPERATURE from /var/log/wireless.cardstats
Cellular Module Temp (not available on all modules).
Kommentare zu diesen Handbüchern