RAM 4000 Bedienerhandbuch PDF herunterladen (Seite 8)

Note: a. The installation should be performed by trained technicians.

b. The maximum angle of the machine is 15° when installing and in

transit.

(5) PAY ATTENTION TO THE FOLLOWING MATTERS WHEN

INSTALLING THE VENDING MACHINE.

A) All electrical wiring must have a dedicated 120 VAC 20 AMP

circuit breaker. The vending machine must be plugged into its

own properly rated single phase outlet.

B) Keep the connector plug clear and make sure to plug it in its right

position to avoid fire hazzards.

C) Do not alter the grounding wire, and the wire cannot be connected

with the central heating pipe, gas pipe and some other wires.

D) Hold the connector plug while unpluggging the vending machine.

Do not pull the electrical wire.

E) Check the electrical wire carefully before using it. If it is damaged,

then it must be replaced by the special technicians.

F) When installed, please take effective measures to avoid tipping

the vending machine.

Picture I

2.2

27.5 in.

2.2

26.1

25.7

5.9

Install Plane

5.9

Position of foot

Position of hole

Position of foot

Position of hole

Position of foot

Vending Machine

Bulgy Bolt

BACK

FRONT

Bottom Board

Bottom Kickstand

Picture II

Hexagonal Nut

Elastic Pad

Even Pad

Bottom Board

Picture IV

Vending Machine

Hard Ground

Picture III

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare

RAM 4000 Bedienerhandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker RAM 4000