RAM 4000 Bedienerhandbuch PDF herunterladen (Seite 40)

machine trays function properly.

7). Coinage Maintenance Periodic lubrication of the transmission

position will reduce friction to ensure flexible change giving process.

8). Key Press Maintenance Clean the key press regularly. Check the

keys to make sure they are working correctly. DO NOT CLEAN WITH

ACETONE, ALCOHOL OR ANY CORROSIVE COMPOUNDS!

9). Refrigeration System Maintenance In order to ensure that the

product which is vended from your machine is of suitable

temperature, it is necessary to keep the compressor, condenser,

evaporator and all other parts in the refrigeration system in good

working order. By visually checking and listening you can settle little

issues that may arise according to the sound, temperature and frost

condition. Avoiding future serious problems and reducing any

maintenance.

a). In order to assure the refrigeration system is running well, please

make sure the evaporator fan can run un-obstructed.

b). While clearing the condenser, please use a soft brush such as a

plastic brush (DO NOT USE A METAL BRUSH) to scrub the metal

vanes up and down. (As shown in picture).

c). Make sure the air path is accessible. Do not put anything near the

air path to ensure there will not be a blockage.

d). The water after defrost occurs must be drained from the drainage

funnel within 24 hours. There must not be puddling that occurs. This

may void your warranty. Please check regularly.

e). It will take over 5 minutes to restart the compressor if it is ever

shut down. Please be patient. Otherwise, the system may become

too hot or shut-off due to extensive pressure. Failure to wait for

compressor to initiate, may cause your warranty to become void.

Condenser

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 49 50

Keine Kommentare

RAM 4000 Bedienerhandbuch Seite 40