RAM V-6000 Bedienungsanleitung PDF herunterladen (Seite 10)

Modification reserved • 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ

The extent of opening and closing of the grab can be adjusted to match the type of bale being handled.

6.1 ROUND BALES

This setting enables 0.90m to 1.80m diameter

bales to be picked up.

6.1.1 Position the MANUBAL bale grab upright.

6.1.2 Open the grab halfway. Lower the MANUBAL bale

grab to the ground. Stop the engine.

6.1.3 Remove the clip from the rod-end ram pin and

remove the pin.

Note: the screw on the pin flat acts to prevent rotation

and need not be removed.

6.1.4 Position the ram opposite the hole for the round bale

setting. See table below.

6.1.5 Insert the pin as well as the synchronising link in the

appropriate hole.

Note: check the spacers for correct positioning.

6.1.6 Refit the clip.

6.1.7 Repeat operations 6.1.3 to 6.1.6 for the cylinder-end

ram pin.

6. GRAB OPENING / CLOSING ADJUSTMENT

364187_10

515755

515765

MANUBAL V40-V50-W500 MANUBAL V500-V6000

MANUBAL V40 - V50 - W500 MANUBAL V500 - V6000

Synchronising links - Viewed from below

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Keine Kommentare

RAM V-6000 Bedienungsanleitung Seite 10