RAM 4000 Bedienungsanleitung PDF herunterladen (Seite 3)

MANUAL - UG4000 SERIES SPRAY GUN CLEANERS REVISED 2012-03A

SETUP

DELIVERY INSPECTION

• Inspect the shipping carton for any sign of transport damage. Carefully remove the unit from the ship-

ping carton and check the unit for damage. Report any transport damage immediately to the carrier

and your vendor. Initiate a freight claim with the carrier. The manufacturer is not responsible for the

freight damage.

• Make sure the bag of accessories contains the following:

• Manual

• Kit-Plug, Guns w. Trigger Lock Springs, 2 pieces (Part No. 140-2340)

• Nozzle Adapters:

110-430 Push-on, coventional systems only

110-430PPS Push-on, disposable cup or conventional systems

Note: A

dapter #780-3530 is installed for use with disposable cup system only

LOCATION

Position in a well-ventilated area away from sparks, heat and open flames.

LEVELING AND AIR SUPPPLY

• Level the machine using the adjustable legs.

• Attach an air supply adapter (not supplied) to the Air Inlet.

The air supply pressure must be at least 85 PSI and the air must be free from contaminants such as

water, dust, rust, tar, grease etc.

To prevent damage to the Diaphragm Pump an internal Air Pressure Regulator has been installed to

limit the air pressure to precisely 85 PSI. Do not install a second air pressure regulator or use a pres-

sure set below 85 PSI.

SOLVENT SELECTION

The adhesion quality of automotive paint has dramatically improved in recent years. The choice of sol-

vent is critical. Only use good quality solvent that is formulated for your paint and intended for use with

automatic spray guns cleaners.

1 2 3 4 5 6 7 8 ... 13 14

Keine Kommentare

RAM 4000 Bedienungsanleitung Seite 3