RAM 3000 Bedienungsanleitung PDF herunterladen (Seite 6)

MANUAL - SPRAY GUN CLEANERS - UG1000-3000 SERIES REVISION 2007-11

SOLVENT SELECTION

The adhesion quality of automotive paint has dramatically improved in recent years. The choice of sol-

vent is critical. Only use good quality solvent that is formulated for your paint and intended for use

with automatic spray guns cleaners.

SOLVENT PAIL SETUP

• Open the door to the base cabinet

• Move the Drain Valve handle to the "closed" (horizontal) position if it is not already there. See

picture on right.

• One 5-Gal (19 L) pail of solvent is required. Place the pail in front of the machine.

• Disconnect the Suction Pipe from the Drain Valve by pushing the gray button and bring pipe

outside of the cabinet.

• Move the pail into the cabinet and re-connect the Suction Pipe to the Drain Valve. Insert suction

pipe into the pail.

GROUND WIRE INSTALLATION

• Two ground wires are provided to discharge static electricity. Use one wire to connect the pail to

the suction pipe. Connect the wire on the outside back of the cabinet to an external grounded

object.

Drain Valve

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

RAM 3000 Bedienungsanleitung Seite 6